Ricoh Aficio MP 301SPF User Manual page 167

Message
"Some page(s) are almost
blank. To cancel press the
Stop key."
"The selected file(s)
contained file(s) without
access privileges. Only
file(s) with access privileges
will be deleted."
"Updating the destination
list... Please wait. Specified
destination(s) or sender's
name has been cleared."
"You do not have the
privileges to use this
function."
"The destination cannot be
selected because its
certificate is not currently
valid."
"The group destination
cannot be selected because
it contains a destination with
a certificate that is not
currently valid."
"Transmission cannot be
performed because the
certificate used for the S/
MIME signature is not
currently valid."
Causes
The first page of the
document is almost blank.
You tried to delete a
document for which you do
not have permission to
delete.
The destination list is being
updated from the network
using Web Image Monitor.
The logged in user name
does not have permission for
the selected function.
The user certificate
(destination certificate) has
expired.
The user certificate
(destination certificate) has
expired.
The device certificate (S/
MIME) has expired.
When Messages Are Displayed on the Control Panel
Solutions
The original's blank side might have
been scanned. Be sure to place your
originals correctly. For details about
determining the cause of blank pages,
see "Detecting Blank Pages", Fax
To check your access permission for
stored documents, or to delete a
document you do not have permission
to delete, see Security Guide
Wait until the message disappears. Do
not turn off the main power switch
while this message is displayed.
Depending on the number of
destinations to be updated, there may
be some delay before you can resume
operation. Operation is not possible
while this message is displayed.
For details about how to set
permissions, see Security Guide
A new user certificate must be installed.
For details about the user certificate
(destination certificate), see Security
Guide .
A new user certificate must be installed.
For details about the user certificate
(destination certificate), see Security
Guide .
A new device certificate (S/MIME)
must be installed. For details about
how to install a device certificate (S/
MIME), see Security Guide
.
.
.
.
165