1.
Place the original face down on the exposure glass. The original should be aligned to the
rear left corner.
1 1
1. Positioning mark
2.
Load the envelopes face down in the bypass tray.
The bypass tray ( ) is automatically selected.
3.
Press the [ ] key.
4.
Press [Paper Size].
5.
Specify the envelope size, and then press [OK].
6.
Press [Paper Type].
7.
Press [Thick Paper], and then press [OK].
8.
Press [OK].
9.
Press the [Start] key.
CMS001
Copying onto Envelopes
69