1. Manuals
  2. Brands
  3. Juniper Manuals
  4. Software
  5. JUNOSE SOFTWARE FOR E SERIES 11.3.X - PHYSICAL LAYER CONFIGURATION GUIDE...
  6. Configuration manual

Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - PHYSICAL LAYER CONFIGURATION GUIDE 2010-09-24 Configuration Manual page 65

Software for e series broadband services routers physical layer configuration guide
Hide thumbs
Table of Contents

Advertisement

Chapter 1: Configuring Channelized T3 Interfaces
Crc type checking - CRC16
Hdlc mru = 1600
Hdlc mtu = 1600
Hdlc interface speed = 768000
Hdlc idle-character marks
Invert data disabled
Ds0 time slot map = 0xfff
Ds0 mode = Nx64
Serial Interface at 13/0:2
Description: ottawa013 hdlc channel
ifOperStatus = ifOperUp
snmp trap link-status = disabled
Crc type checking - CRC16
Hdlc mru = 1600
Hdlc mtu = 1600
Hdlc interface speed = 768000
Invert data disabled
Ds0 time slot map = 0xfff000
Ds0 mode = Nx64
Found 2 Serial Interfaces
See show interfaces.
Copyright © 2010, Juniper Networks, Inc.
43

Advertisement

Table of Contents
loading

Related Manuals for Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - PHYSICAL LAYER CONFIGURATION GUIDE 2010-09-24

Related Products for Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - PHYSICAL LAYER CONFIGURATION GUIDE 2010-09-24

This manual is also suitable for:

Junose 11.3

Table of Contents