Command Line Interface Reference for the ProSafe 7300S Series Layer-3 Stackable Switches,
6.1.14 vlan port ingressfilter all
This command enables ingress filtering for all ports. If ingress filtering is disabled, frames
received with VLAN IDs that do not match the VLAN membership of the receiving
interface are admitted and forwarded to ports that are members of that VLAN.
Default
Format
Mode
6.1.14.1 no vlan port ingressfilter all
This command disables ingress filtering for all ports. If ingress filtering is disabled, frames
received with VLAN IDs that do not match the VLAN membership of the receiving
interface are admitted and forwarded to ports that are members of that VLAN.
Format
6.1.15 Global Config
Mode
6.1.16 vlan protocol group
This command adds protocol-based VLAN group to the system. The <
character string of 1 to 16 characters. When it is created, the protocol group will be
assigned a unique number that will be used to identify the group in subsequent commands.
Format
Mode
6.1.17 vlan protocol group add protocol
This command adds the
. A group may have more than one protocol associated with it. Each interface
<groupid>
and protocol combination can only be associated with one group. If adding a protocol to a
group causes any conflicts with interfaces currently associated with the group, this
command will fail and the protocol will not be added to the group. The possible values for
protocol are
ip, arp,
Default
Format
Mode
6-8
disabled
vlan port ingressfilter all
Global Config
no vlan port ingressfilter all
vlan protocol group <groupname>
Global Config
to the protocol-based VLAN identified by
<protocol>
and
.
ipx
none
vlan protocol group add protocol <groupid> <proto-
col>
Global Config
v3.0, January 2008
is a
groupName>
VLAN Commands