Snmp-Server Traps; Snmp-Server Traps Bcaststorm - NETGEAR FSM7328PS - ProSafe 24 Port 10/100 L3 Managed Stackable Switch Reference Manual

Command Line Interface Reference for the ProSafe 7300S Series Layer-3 Stackable Switches,
10.1.8.1 no snmp-server traps violation
This command disables the sending of new violation traps.
Format
Mode

10.1.9 snmp-server traps

This command enables the Authentication Flag.
Default
Format
Mode
10.1.9.1 no snmp-server traps
This command disables the Authentication Flag.
Format
Mode

10.1.10 snmp-server traps bcaststorm

This command enables the broadcast storm trap. When enabled, broadcast storm traps are
sent only if the broadcast storm recovery mode setting associated with the port is enabled.
Default
Format
Mode
10.1.10.1 no snmp-server traps bcaststorm
This command disables the broadcast storm trap. When enabled, broadcast storm traps are
sent only if the broadcast storm recovery mode setting associated with the port is enabled.
Format
Mode
SNMP Commands
no snmp-server traps violation
Interface Config
enabled
snmp-server traps
Global Config
no snmp-server traps
Global Config
enabled
snmp-server traps bcaststorm
Global Config
no snmp-server traps bcaststorm
Global Config
v3.0, January 2008
10-5