Show Port Protocol; Show Port Status - NETGEAR FSM7328PS - ProSafe 24 Port 10/100 L3 Managed Stackable Switch Reference Manual

Command Line Interface Reference for the ProSafe 7300S Series Layer-3 Stackable Switches,

4.1.18 show port protocol

This command displays the Protocol-Based VLAN information for either the entire
system, or for the indicated group.
Format
Mode
Group Name
Group ID
Protocol(s)
VLAN
Interface(s)

4.1.19 show port status

This command displays the output with current port attributes and operational status.
Format
Mode
Interface
Media Type
Physical Mode
Physical Status
Link Status
Loop Status
Partner Flow
Control
Port and System Setup Commands
show port protocol {<groupid> | all}
Privileged EXEC
This field displays the group name of an entry in the Proto-
col-based VLAN table.
This field displays the group identifier of the protocol group.
This field indicates the type of protocol(s) for this group.
This field indicates the VLAN associated with this Protocol
Group.
This field lists the unit/slot/port interface(s) that are associ-
ated with this Protocol Group.
show port status {<unit/slot/port> | all}
Privileged Exec
Valid slot and port number separated by forward slashes.
"Copper" or "Fiber" for combo port.
Either "Auto" or fixed speed and duplex mode.
The actual speed and duplex mode
Whether the link is Up or Down.
Whether the port is in loop state or not.
Whether the remote side is using flow control or not.
v3.0, January 2008
4-9