Port-Based Access And Authentication Commands; Port-Based Network Access Control Commands; Authentication Login - NETGEAR FSM7328PS - ProSafe 24 Port 10/100 L3 Managed Stackable Switch Reference Manual

This section describes the port-based access and authentication commands available in the
7300S Series Stackable Switch CLI.
The Port-Based Access and Authentication Commands section includes the following
topics:
• Section 11.1 "Port-Based Network Access Control Commands" on page 11-1
• Section 11.2 "RADIUS Commands" on page 11-14
The commands in this section lie in one of two functional groups:
• Configuration commands are used to configure features and options of the switch. For
every configuration command there is a show command that will display the
configuration setting.
• Show commands are used to display switch settings, statistics and other information.

11.1 Port-Based Network Access Control Commands

This section describes the commands you use to configure port-based network access
control (802.1x). Port-based network access control allows you to permit access to
network services only to and devices that are authorized and authenticated.

11.1.1 authentication login

This command creates an authentication login list. The
string and is not case sensitive. Up to 10 authentication login lists can be configured on the
switch. When a list is created, the authentication method "local" is set as the first method.

Port-Based Access and Authentication Commands

Port-Based Access and Authentication
v3.0, January 2008
Chapter 11
Commands
is any character
<listname>
11-1