Command Conventions - NETGEAR FSM7328PS - ProSafe 24 Port 10/100 L3 Managed Stackable Switch Reference Manual

Prosafe 7300s series layer-3 stackable switches,software version 7.1, command line interface reference
Hide thumbs Also See for FSM7328PS - ProSafe 24 Port 10/100 L3 Managed Stackable Switch:
Table of Contents

Advertisement

Command Line Interface Reference for the ProSafe 7300S Series Layer-3 Stackable Switches,
Some commands, such as
Other commands, such as
command. You must type the parameter values in a specific order, and optional parameters
follow required parameters. The following example describes the
command syntax:
Format
network parms is the command name.
<ipaddr>
enter after you type the command keywords.
[gateway]
of the parameter.
The CLI Command Reference lists each command by the command name and provides a
brief description of the command. Each command reference also contains the following
information:
Format shows the command keywords and the required and optional parameters.
Mode identifies the command mode you must be in to access the command.
Default shows the default value, if any, of a configurable setting on the device.
The
commands also contain a description of the information that the command
show
displays.

2.3.2 Command Conventions

In this document, the command name is in
must replace the parameter name with an appropriate value, which might be a name or
number. Parameters are order dependent.
The parameters for a command might include mandatory values, optional values, or
keyword choices. Table 2-1 describes the conventions this document uses to distinguish
between value types.
Table 2-1. Parameter Conventions
Symbol
<> angle brackets
[] square brackets
Overview
show network
network parms
network parms <ipaddr> <netmask> [gateway]
and
are parameters and represent required values that you must
<netmask>
is an optional parameter, so you are not required to enter a value in place
Example
<value>
[value]
v3.0, January 2008
or
, do not require parameters.
clear vlan
, require that you supply a value after the
font. Parameters are in
bold
Description
Indicates that you must enter a value in
place of the brackets and text inside them.
Indicates an optional parameter that you
can enter in place of the brackets and text
inside them.
network parms
font. You
italic
2-3

Advertisement

Table of Contents
loading

Table of Contents