Removing Name Spaces; Creating An Edirectory Object For A Traditional Volume; Naming Or Renaming A Traditional Netware Partition Or Volume; Deleting A Traditional Volume - Novell Open Enterprise Server 2 System Administration Manual

3.14.3 Removing Name Spaces

You can remove the name space by deleting the volume and re-creating it, or by using the Vrepair
utility. For instructions, see
3.15 Creating an eDirectory Object for a
Traditional Volume
If a NetWare volume exists on the server and does not have a corresponding Volume object in
Novell eDirectory
Manager on the Partition Disks page. This can occur when you create a new server and keep an
existing Traditional volume.
1 In Novell Remote Manager for NetWare, click Manage Servers > Volumes.
2 Locate the volume where you want to create a new eDirectory object, then click the Create
3.16 Naming or Renaming a Traditional NetWare
Partition or Volume
After creating a partition, you can give the partition a name (label). You can rename the partition by
modifying the label. You can also delete the label.
Naming or Renaming the Partition Label
1 In Novell Remote Manager for NetWare, click Manage Servers > Partition Disks.
2 Locate the partition you to want to label or rename, then click the Set Partition Label link next
3 In the Enter the New Partition Label field, specify the name for the partition.
4 Click Apply, then click OK.
Deleting the Partition Label
1 In Novell Remote Manager for NetWare, click Manage Servers > Partition Disks.
2 Locate the partition you want to delete the label from, then click the Name link of the partition.
3 Click Delete Partition Label, then click OK.

3.17 Deleting a Traditional Volume

1 In Novell Remote Manager, click Manager Servers > Volumes to view a list of volumes.
2 Locate the Traditional volume you want to delete, then click the Delete link next to it.
3 Click OK to confirm your choice.

3.18 Repairing a Traditional Volume

Typically, you cannot mount a Traditional volume if it has even minor damage. Occasionally, a
damaged volume mounts and causes errors in the process.
24 OES 2: NetWare Traditional File System Administration Guide
Section 3.18, "Repairing a Traditional Volume," on page
, a Create eDir Object link appears on the volume line in Novell Remote
TM
eDir Object next to it.
to it, or click the link for the name of the partition.
24.