Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - COMMAND LINE UTILITIES REFERENCE 10.3 30-03-2010 Command Reference Manual page 96

satellite-roles (satr)
Reports on current Satellite roles and their state.
Example:
zac satr
imgsatserver status (iss status)
Displays the device's imaging role properties, including its current status, PXE service status,
image files, and imaging statistics.
Current Status: Displays whether your device is currently configured to perform Imaging
operations. The current status is Active when the device is promoted to a satellite with the
Imaging role.
PXE Service Status: Displays whether the Proxy DHCP service is enabled on the device.
PXE Requests: The number of imaging requests of any kind that have been received by the
Imaging Server since it was last started. This includes requests that failed, were denied, or were
referred to other Imaging Servers. Information about each of these requests, such as the source,
type, date/time, and results, is logged on the Imaging Server.
Images Sent: The number of images that the Imaging Server has sent to imaging clients since
the Imaging Server was last started. This includes only images that were retrieved from this
Imaging Server.
Images Received: The number of new images that have been received and stored on the
Imaging Server since it was last started. This includes images that were received through client
referrals.
Example:
zac iss status
Status Commands
agent-properties (agp)
Provides information about the ZENworks Adaptive Agent. The following fields provide
information about the ZENworks Adaptive Agent:
Device Address. The IP address of your device.
Device Name. The computer name for your device.
Device State. The state of the device - Managed, Unmanaged, Retired, or Unknown. The
Unknown state is displayed only if there is an error.
Last Contact With Server. The last time the Adaptive Agent contacted the ZENworks Server.
Next Contact With Server. The time scheduled for the Adaptive Agent to contact the
ZENworks Server.
Primary User. The currently logged in user.
Example:
zac agp
zac agent-properties
96 ZENworks 10 Configuration Management Command Line Utilities Reference