Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - COMMAND LINE UTILITIES REFERENCE 10.3 30-03-2010 Command Reference Manual page 51

satellite-server-add-content-replication-setting (ssacrs) [options] (Path To
Device) (Content Type) (file path)
Add a content type replication schedule and throttle setting to the Satellite device.
(Path To Device) - The full name of the satellite device to which to add the replication setting.
(Content Type) - The name of the content type for the replication setting to add to the satellite
device.
(file path) - The full path to a file with the schedule data for the replication setting saved in
XML format.
Accepts the following options:
-d, --duration=<duration> - The content replication duration period (in minutes).
-t, --throttleRate=<Throttle Rate> - The throttle rate in kbps for the replication setting to add to
the satellite device.
satellite-server-add-imagingrole (ssaimg) (Managed device) [-p|--
proxydhcp=ProxyDHCP Service]
Promotes a managed device to a Satellite with the Imaging server role. If the managed device is
already functioning as a Satellite, this command adds the Imaging server role.
(Managed device) - The path of the managed device relative to
-p, --proxydhcp=<ProxyDHCP Service> - Starts or stops the Proxy DHCP service. The valid
values are
start
satellite-server-create (ssc) (path to device) ((role),(role),...(role))
[Parent Primary Server] [Satellite Server Port] [Satellite Server Secure HTTPS
Port] [--force-port-change] [--force-parent-change]
Allows you to configure a Satellite role.
Accepts the following options:
(path to device) - The full name of the managed device to create as a Satellite.
(role) - The Satellite roles to add to the managed device. Roles include Authentication,
Collection, and Content. If you want to assign the Imaging Satellite role or to promote a
managed device to a Satellite with the Imaging server role, you must use the
command instead of this command.
[Parent Primary Server] - The full name of the Primary Server to which the Satellite rolls up its
collection data or from which it obtains its content. This field is optional if the managed
device is already a Satellite.
[Satellite Server Port] - The port that the Satellite should use to listen for collection roll-up
requests or for obtaining content from the parent Primary Server. If it is not specified, port 80
is used.
[Satellite Server Secure HTTPS Port] - The port that the Satellite should use to listen for
authentication secure HTTPS requests. If not specified, port 443 is used.
[--force-port-change] - If the managed device is already functioning as a Satellite, this option
allows you to change the port that all Satellite components on this device listen to for
requests or for obtaining content.
[--force-parent-change] - If the managed device is already functioning as a Satellite, this option
allows you to change the Primary Server parent for all Satellite components on the device.
and .
stop
/Devices/Workstations
zman ssaimg
ZENworks Command Line Utilities
.
51