Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - COMMAND LINE UTILITIES REFERENCE 10.3 30-03-2010 Command Reference Manual page 23

-a, --availability-schedule=[availability schedule XML file or
contains the availability schedule or
schedule XML file templates, refer to the XML files located in
share/zman/samples/schedules
Installation_directory:\Novell\Zenworks\share\zman\samples\
on a Windows server.
schedules
-i, --install-immediately=[yes or no] - Install the bundle immediately after distribution, or
remove the same option set during bundle assignment. Valid values are
or .
false no
-L, --launch-immediately=[yes or no] - Launch the bundle immediately after installation, or
remove the same option set during bundle assignment. Valid values are
or .
false no
-n, --distribute-now=[yes or no] - Sets the distribution schedule to distribute the bundle
immediately. If this option is specified, the --distribution-schedule and --distribute-on-
device-refresh options are ignored. The --distribute-now, --distribute-on-device-refresh, and
--distribution-schedule options are mutually exclusive and are used to set the distribution
schedule. The --distribute-now option is considered first, followed by --distribute-on-device-
refresh and --distribution-schedule.
-r, --distribute-on-device-refresh=[yes or no] - Sets the distribution schedule to distribute the
bundle on device refresh, or removes the same option set during bundle assignment. Valid
values are or
true
--distribution-schedule option is ignored and any previously set distribution schedule is
overwritten.
-s, --launch-on-device-refresh=[yes or no] - Sets the launch schedule to launch the bundle on
device refresh. If this option is specified, the --launch-schedule option is ignored.
-w, --wakeup-device-on-distribution=[yes or no] - Wakes up the device by using Wake-On-
LAN if it is shut down while distributing the bundle, or removes the same option set during
bundle assignment. Valid values are
-B, --broadcast=[Broadcast address][...] - A comma-separated list of addresses used to
broadcast the Wake-On-LAN magic packets. This option is used only if you choose to wake
up the device by using Wake-On-LAN. A valid IP address is a valid value.
-S, --server=[Path of the Primary or Proxy Server objects relative to
comma-separated list of Primary or Proxy Server objects used to wake up the device. This
option is used only if you choose to wake up the device by using Wake-On-LAN.
-C, --retries=[Number of retries] - Number of times the Wake-On-LAN magic packets are sent
to the devices. This option is used only if you choose to wake up the device by using
Wake-On-LAN. The value must be between 0 and 5. The default value is 1.
-T, --timeout=[Time interval between retries] - The time interval between two retries. This
option is used only if you choose to wake up the device by using Wake-On-LAN. The value
must be between 2 and 10 (in minutes). The default value is 2.
bundle-view-advanced-deployment-status (bvads) [options] (bundle path)
Displays advanced deployment status of a bundle.
Accepts the following options:
-d, --device=[device path] - Displays the deployment status only for the specified device. The
path of the device is relative to
-u, --user=[user path] - Displays the deployment status only for the specified user. The path of
the user is relative to
logged into the specified device are displayed.
NoSchedule
on a Linux server or
, and or . If this option has the value
yes false no
or
true
.
/Devices
. If device is also specified, status details for the specified user
/Users
NoSchedule
if the schedule must be removed. For the
/opt/novell/zenworks/
, and or .
yes false no
/Devices][...]
ZENworks Command Line Utilities
] - XML file that
or , and
true yes
or , and
true yes
or , the
true yes
- A
23