Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - COMMAND LINE UTILITIES REFERENCE 10.3 30-03-2010 Command Reference Manual page 81

To fetch the configuration files from the server:
zac asr -t config
To reconfigure the CASA signing certificate:
zac asr -t casa
To reconfigure the Jetty web server:
zac asr -t jetty -u Administrator -p password
To reconfigure the entire Satellite:
zac asr -t all -u Administrator -p password
If a username and password is required but is not provided on the command line you will be
prompted.
import-authentication-cert(iac)[-pk <private-key.der>] [-c <signed-server-
certificate.der>] [-ca <signing-authority-public-certificate.der>] [-ks
<keystore.jks>] [-ksp
<signed-cert-passphrase>] [-u username] [-p password]
Configures an Authentication Satellite device with externally signed certificates.
Bundle Commands
bundle-install (bin) <bundle display name>
Installs the specified bundle. Use the
bundles and their display names.
Example:
zac bin bundle1
bundle-launch (bln) <bundle display name> [-noSelfHeal]
Launches the specified bundle. Use the
bundles and their display names.
Example to launch a bundle based on the display name:
zac bln bundle1
Example to launch a bundle based on the display name and turn selfhealing off if the launch
action fails (by default, selfhealing is turned on):
zac bln bundle1 -noSelfHeal
bundle-list (bl)
Displays the list of bundles assigned to the device and the logged in user.
Example:
zac bl
bundle-props (bp) <bundle display name>
Displays the status, version, GUID, and requirements information for the specified bundle. Use
the command to get a list of the available bundles and their display names.
bundle-list
Example:
zac bln bundle1
<keystore-pass-phrase>] [-a <signed-cert-alias>] [-ks
bundle-list
bundle-list
command to get a list of the available
command to get a list of the available
ZENworks Command Line Utilities 81