Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - COMMAND LINE UTILITIES REFERENCE 10.3 30-03-2010 Command Reference Manual page 94

Example to display all preferences that have names beginning with abc:
zac get-pref abc
set-pref (set) <preference name> <preference value>
Sets the value for a preference.
Example to set the value of preference abc to 123:
zac set-pref abc 123
The following preferences are used to set a proxy:
proxy-host
proxy-port
proxy-username
proxy-password
Logging Commands
logger [resetlog | level [MANAGED|ERROR|WARN|INFO|DEBUG] |managedlevel]
Changes the logger configuration.
You can use the following options:
resetlog - Resets the log.
level - If used without a level, displays the current managed logging level. If used with one of
the levels, changes the logging level to the specified level.
managedlevel - Displays the current managed logging level.
Example to reset the log file:
zac logger resetlog
Example to show the current log level:
zac logger level
Example to set the log level to DEBUG and above:
zac logger level DEBUG MANAGED
Registration Commands
add-reg-key (ark) <registration key>
Registers the device by using the specified key. Registration with keys is additive. If the device
has previously been registered with a key and you register it with a new key, the device receives
all group assignments associated with both keys.
Example:
zac ark key12
register (reg) [-k <key>] [-u <username> -p <password] <ZENworks Server
address:port>
Registers the device in a Management Zone.
Examples:
zac reg -k key1 https://123.456.78.90
94 ZENworks 10 Configuration Management Command Line Utilities Reference
- Specifies the proxy server to use to tunnel the HTTP requests.
- Specifies the port to connect to the proxy server.
- Specifies the username to use to connect to the proxy server.
- Specifies the password to use to connect to the proxy server.