Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - COMMAND LINE UTILITIES REFERENCE 10.3 30-03-2010 Command Reference Manual page 30

where
Server
If you have multiple workstations in a directory, and the name of the workstations is prepended
by common alphanumeric characters (for example, dev091, dev092,...dev099), use the
following command from a Linux server to simultaneously apply the assigned imaging bundle
on multiple devices:
zman iaaib workstation folderx/dev{09{1,2,3,4,5,6,7,9}}
The bundle is applied to devices dev091, dev092, and so on.
Inventory Commands
These commands are used to initiate scans and send an inventory data collection form to the
managed devices. Inventory commands begin with
in the short form.
inventory-collection-wizard-run-now (icwrn) [options] (device object path)
[...]
Sends the inventory data collection form to one or more devices.
Accepts the following option:
-f, --folder=[device folder] - The path of the device folder relative to
specified, the path of the device objects is determined relative to this folder. This option can
be used to specify multiple device objects under the same folder.
inventory-scan-now (isn) [options] (device object path) [...]
Initiates an inventory scan of one or more devices.
Accepts the following option:
-f, --folder=[device folder] - The path of the device folder relative to
specified, the path of the device objects is determined relative to this folder. This option can
be used to specify multiple device objects under the same folder.
License Commands
These commands are used to activate your ZENworks server or to display licensing information.
License commands begin with
All of the commands below accept the option flags listed in the
they accept individual options as listed with each command.
license-activate (la) (product name) (license key)
Activates the ZENworks products.
license-deactivate (ld) (product name)
Deactivates the ZENworks products. Only the product name is needed as an argument.
license-info (li)
Displays the licensing information.
30 ZENworks 10 Configuration Management Command Line Utilities Reference
folder/path of device
folder.
license-
is the relative path of the device within the
inventory-
in the long form, or with the letter
Global Options
Workstation
in the long form, or with the letter
. If this option is
/Devices
. If this option is
/Devices
in the short form.
l
section. In addition,
or
i