Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - COMMAND LINE UTILITIES REFERENCE 10.3 30-03-2010 Command Reference Manual page 84

Inventory Commands
inventory (inv) inventory [scannow | cdf]
Runs an inventory scan or opens the Collection Data Form.
Example to run an inventory scan:
zac inv scannow
Example to open the Collection Data Form:
zac inv cdf
Location Commands
config-location (cl)
Displays the configuration location. The configuration location determines which ZENworks
server (or servers) the device connects to for authentication, configuration, content, and
collection purposes.
Examples:
zac config-location
zac cl
security-location (sl) [view | list | set <location>]
Displays or changes the security location for the device. The security location determines
which security policies (settings) are applied to the device.
Accepts the following optional arguments. If no argument is specified, the
used.
view - Displays the current location.
list - Displays all defined locations.
set <location> - Changes to the specified location. <location> must be one of the defined
locations.
Examples:
zac security-location view
zac sl
zac sl list
zac sl set office
Logging Commands
logger (log) resetlog|level [MANAGED|ERROR|WARN|INFO|DEBUG] |managedlevel
logger
Changes or displays the logger configuration for the ZENworks Adaptive Agent.
You can use the following options:
resetlog - Resets the log.
level - If this option is used without a level, it displays the current managed logging level. If it
is used with one of the levels, changes the logging level to the specified level.
84 ZENworks 10 Configuration Management Command Line Utilities Reference
argument is
view
,