Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - COMMAND LINE UTILITIES REFERENCE 10.3 30-03-2010 Command Reference Manual page 101

On Linux:
./zdc verify -v zencontent
You can also specify the following command options while running ZDC.
-s: session name
-l: complete path of the ZDC log filename
-r: complete path of the ZDC
ZDC runs the diagnostic tests and generates the reports in the HTML format. The reports are stored
in the
$ZDC_Home/reports/timestamp
$ZDC_Home\reports\timestamp
that is located in the
index.html
The complete log of the diagnostic tests is stored in
Windows Primary Server and in the
directory
report
directory on a Windows Primary Server and in the
directory on a Linux Primary Server. To view the reports, open
directory.
report
$ZDC_HOME/logs/timestamp.log
$ZDC_HOME\logs\timestamp.log
on a
on a Linux Primary Server.
ZENworks Diagnostic Center 101