Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - COMMAND LINE UTILITIES REFERENCE 10.3 30-03-2010 Command Reference Manual page 27

-t, --timeout=[Time out] - The number of seconds you want the Primary Server to wait for a
response from the Windows Proxy.
-k, --key=[Registration key] - Registration key for registering the device.
deployment-task-delete (dptd) (deployment task name) [...]
Deletes the deployment task.
deployment-task-list (dptl) [options]
Lists the deployment tasks and the status.
Accepts the following options:
-n, --namefilter=[filter string] - Displays results matching the specified name. The wildcards *
and ? can be used if they are enclosed in quotations marks.
-c, --count - Displays the count of the results.
-s, --scrollsize=[scrollsize] - Number of results to be displayed at a time.
deployment-task-run-now (dptrn) (deployment task name) [...]
Schedules the specified deployment task to run immediately. The task should have the
credentials saved in the data store.
Discovery Commands
These commands are used to view device discovery-related information. Discovery commands
begin with
discovery-
All of the commands below accept the option flags listed in the
they accept individual options as listed with each command.
discovery-view-discovered-devices (dvdd) [options]
Lists the discovered devices.
Accepts the following options:
-n, --nameFilter=[filter string] - Displays the devices matching the specified filter. The
wildcard * can be used if it is enclosed in quotations.
-t, --typefilter=[type filter] - Displays options matching the specified type. Valid values are
,
server workstation
. If this option is not specified, all types of devices are displayed.
deployable
-o, --osfilter=[operating system] - Displays devices having the specified OS installed. Valid
values are
other
, ,
sles nld rh_es
-m, --management-status=[management status] - Displays devices having the specified status.
Valid values are
discovered
specified, all types of devices are displayed regardless of their status.
--modefilter=[discovery mode] - Displays the devices discovered by using the specific
discovery mode. Valid values are
. If this option is not specified, all devices are displayed.
migration
-s, --scrollsize=[scrollsize] - Number of results to be displayed at a time.
discovery-task-list (dtl) [options]
Lists the discovery tasks and the status.
in the long form, or with the letter
, ,
printer network
, , , ,
win9x winnt wince
, and . If this option is not specified, all devices are displayed.
rh_as
,
inventoried
,
IP LDAP
in the short form.
d
Global Options
, , ,
thinclient other
, , ,
win2k win2k3 winxp
, , and
managed retired
, ,
csvimport ZENworks-migration
ZENworks Command Line Utilities
section. In addition,
, and
unknown
, , ,
nw6 nw6_5 nwoes suse
. If this option is not
, and
ZAM-
,
27