Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - COMMAND LINE UTILITIES REFERENCE 10.3 30-03-2010 Command Reference Manual page 82

bundle-refresh (br) <bundle display name or guid>
Refreshes information about the specified bundle.
Example:
zac br bundle1
bundle-remove (brm) <bundle display name>
Uninstalls the specified bundle. Use the
bundles and their display names.
Example:
zac brm bundle1
bundle-uninstall (bu) <bundle display name>
Uninstalls the specified bundle. Use the
bundles and their display names.
Example:
zac bu bundle1
bundle-verify (bv) <bundle display name>
Verifies an installed bundle (specified by
been removed or corrupted. Use the
bundles and their display names.
Example:
zac bv bundle1
Content Distribution Commands
cdp-checksum (cchk) [-l:<path to log>]
Validates satellite content by computing the checksum on each file.
The optional log file details results of the checksum comparison.
Example:
zac cchk -l:"C:\Program Files\Novell\ZENworks\logs\cchk.log"
cdp-verify-content (cvc) [-c] [-l:<path to log>]
Compares the list of content IDs and their sync states on this CDP with what the Primary
Servers thinks it should have.
You can use the following options:
c - Computes the checksum on the local content.
Example:
zac cvc -l:"C:\Program Files\Novell\ZENworks\logs\cvc.log"
cdp-import-content (cic) <content path> [-l:<path to log>]
Imports missing content from the directory specified by content-path, logging to the file
specified by log-path.
82 ZENworks 10 Configuration Management Command Line Utilities Reference
command to get a list of installed
bundle-list
command to get a list of installed
bundle-list
bundle display name
command to get a list of the installed
bundle-list
) to ensure that no files have