Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - COMMAND LINE UTILITIES REFERENCE 10.3 30-03-2010 Command Reference Manual page 67

-I, --icon-location=[application location XML file] - XML file that contains the locations to
place the icon for the bundle application. For the XML file format, refer to
located in
IconLocation.xml
on a Linux server or
Installation_directory:\Novell\Zenworks\share\zman\samples\
on a Windows server.
bundles
-d, --distribution-schedule=[distribution schedule XML file] - XML file that contains the
distribution schedule.
-l, --launch-schedule=[launch schedule XML file] - XML file that contains the launch
schedule.
-a, --availability-schedule=[availability schedule XML file] - XML file that contains the
availability schedule. For the schedule XML file templates, refer to the XML files located in
/opt/novell/zenworks/share/zman/samples/schedules
Installation_directory:\Novell\Zenworks\share\zman\samples\ schedules
a Windows server.
-i, --install-immediately - Installs the bundle immediately after distribution.
To use this option, you must also specify the distribution schedule. The distribution schedule
can be specified by using the --distribution-schedule, --distribute-now, or --distribute-on-
device-refresh option.
-L, --launch-immediately - Launches the bundle immediately after installation.
To use this option, you must also specify the distribution schedule. The distribution schedule
can be specified by using the --distribution-schedule, --distribute-now, or --distribute-on-
device-refresh option.
-n, --distribute-now - Sets the distribution schedule to distribute the bundle immediately. If this
option is specified, the --distribution-schedule and --distribute-on-device-refresh options are
ignored. The --distribute-now, --distribute-on-device-refresh and --distribution-schedule
options are mutually exclusive and are used to set the distribution schedule. The --distribute-
now option is considered first, followed by --distribute-on-device-refresh and --distribution-
schedule.
-r, --distribute-on-device-refresh - Sets the distribution schedule to distribute the bundle on
device refresh. If this option is specified, the --distribution-schedule option is ignored.
-s, --launch-on-device-refresh - Sets the launch schedule to launch the bundle on device
refresh. If this option is specified, the --launch-schedule option is ignored.
-w, --wakeup-device-on-distribution - Wakes up the device by using Wake-On-LAN if it is shut
down while distributing the bundle.
To use this option, you must also specify the Distribution schedule. The Distribution schedule
can be specified by using the --distribution-schedule, --distribute-now, or --distribute-on-
device-refresh option.
-B, --broadcast=[Broadcast address][...] - A comma-separated list of addresses used to
broadcast the Wake-On-LAN magic packets. This option is used only if you choose to wake
up the device by using Wake-On-LAN. A valid IP address is a valid value.
-S, --server=[Path of the Primary or Proxy Server objects relative to
comma-separated list of Primary or Proxy Server objects used to wake up the device. This
option is used only if you choose to wake up the device by using Wake-On-LAN.
/opt/novell/zenworks/share/zman/samples/bundles
on a Linux server or
- A
/Devices][...]
ZENworks Command Line Utilities
on
67