Viewing And Modifying Dns Settings - Novell ACCESS MANAGER 3.1 SP1 - GATEWAY GUIDE Manual

Metric: A relative number indicating the bias you can add to the normal flow of gateway logic.
Specifying a number higher than 1 makes this resource more expensive and alters the gateway
logic used. Valid numbers include 1 through 16.
Type: Gateways are active if they publish their presence, or passive if they do not.
Click OK when the fields are configured.
6 Configure your network gateways, which are the gateways to be used for packets being sent to
specific subnets. When you select New from the Network Gateway list, you are asked for the
following information:
Next Hop: The address of the gateway that is to be used.
Network Address: The subnet address for the destination IP address range. You can also enter
a specific IP address on a given subnet, and the Access Gateway calculates the subnet address
using the mask.
Mask: The subnet mask for the subnet or IP address above. A valid entry must be at least as
large as a class mask where a Class A mask is 255.0.0.0, a Class B mask is 255.255.0.0, and
Class C, D, and E masks are 255.255.255.0.
Metric: A relative number indicating the bias you can add to the normal flow of gateway logic.
Specifying a number higher than 1 makes this resource more expensive and alters the gateway
logic used. Valid numbers include 1 through 16.
Type: Gateways are active if they publish their presence, or passive if they do not.
Click OK when the fields are configured.
7 To save your changes to browser cache, click OK.
8 On the Server Configuration page, click OK, then click Update > OK.

3.8.3 Viewing and Modifying DNS Settings

The DNS page displays the current configuration for domain name services and allows you to
modify it.
1 In the Administration Console, click Devices > Access Gateways > Edit > DNS.
94 Novell Access Manager 3.1 SP1 Access Gateway Guide