Stopping The Access Gateway Appliance - Novell ACCESS MANAGER 3.1 SP1 - GATEWAY GUIDE Manual

Name Scheduled Command: (Required) Specifies a name for this scheduled command. This
name is used in log and trace files.
Description: (Optional) Provides a field to describe the reason for the command.
Date & Time: The drop-down menus allow you to select the day, month, year, hour, and
minute when the command should execute.
4 Click OK.

3.3.6 Stopping the Access Gateway Appliance

You should stop the Access Gateway Appliance only when you plan to turn off the power. After you
have stopped the Access Gateway Appliance, you must have physical access to the machine to start
it.
"Immediately Stopping the Gateway Appliance" on page 81
"Scheduling the Shutdown of the Gateway Appliance" on page 81
Immediately Stopping the Gateway Appliance
1 In the Administration Console, click Devices > Access Gateways, select the Access Gateway,
then click Stop.
2 To confirm the shutdown, click OK.
The machine is physically turned off.
Scheduling the Shutdown of the Gateway Appliance
Scheduling a shutdown allows you to pick the best time for the Access Gateway to be unavailable.
1 In the Administration Console, click Devices > Access Gateways, select the Access Gateway,
then click Actions.
2 Click Schedule Shutdown.
The type field displays information about the command you are scheduling, such as Access
Gateway Shutdown, Access Gateway Restart, Access Gateway Upgrade, Device Configuration
3 Fill in the following fields:
Name Scheduled Command: (Required) Specifies a name for this scheduled command. This
name is used in log and trace files.
Description: (Optional) Provides a field to describe the reason for the command.
Date & Time: The drop-down menus allow you to select the day, month, year, hour, and
minute when the command should execute.
4 Click OK.
The machine is turned off when the scheduled command executes.
Server Configuration Settings 81