Form Fill Issues; Form Fill Does Not Process Forms With Complicated Javascript Functions When Data Is Auto-Submitted - Novell ACCESS MANAGER 3.1 SP1 - GATEWAY GUIDE Manual

500 Internal Server Error
Possible Cause: Authentication failed because of a system error.
Action: Contact Novell Support.
504 Gateway Timed Out
Possible Cause: The authentication back-end channel is not working.
Action: Check to see if the Embedded Service Provider is listening on the loopback address
127.0.0.1 at port 8080: Use the following command:
netstat -na | grep 8080
If the Embedded Service Provider is down, restart the service provider from the Administration
Console.
If the issue persists, contact Novell Support.

7.8 Form Fill Issues

Form Fill error messages are logged only if you set the log level to LOG_DEBUG. The entries are
logged in the
information, see
Guide.
This section contains the following information about form fill issues:
Section 7.8.1, "Form Fill Does Not Process Forms with Complicated JavaScript Functions
when Data is Auto-Submitted," on page 204
Section 7.8.2, "Form Fill Error Messages," on page 205
Section 7.8.3, "Alert: SSO (Form Fill) Failed Due to Malformed HTML," on page 205
Section 7.8.4, "Form Fill Failure Because of Incorrect Policy Configuration," on page 205
Section 7.8.5, "Browser Spinning Issues," on page 205
7.8.1 Form Fill Does Not Process Forms with Complicated
JavaScript Functions when Data is Auto-Submitted
If Form Fill fails to process forms with complicated JavaScript or VBScript functions when data is
auto-submitted even if the Statements to Execute on Submit option is selected, then do the following:
1 Log in as
2 Specify the following command to create the .
touch /var/novell/.enableInPlaceSilentFill
3 Specify the following command to create the
touch /var/novell/.enableInPlaceSilentFillNew
4 Specify the following command to restart Linux Access Gateway:
/etc/init.d/novell-vmc stop
/etc/init.d/novell-vmc start
204 Novell Access Manager 3.1 SP1 Access Gateway Guide
file. Search for entries with a correlation tag of
ics_dyn.log
"Form Fill Traces" in the
.
root
Novell Access Manager 3.1 SP1 Policy Management
enableInPlaceSilentFill
enableInPlaceSilentFillNew
. For more
AM#504507
file:
file: