Customizing Error Pages On The Gateway Appliance; Section 3.7, "Customizing Error Pages On The Gateway Appliance - Novell ACCESS MANAGER 3.1 SP1 - GATEWAY GUIDE Manual

2 (Conditional) If the Access Gateway belongs to a cluster of Access Gateways, select the Access
Gateway from the list displayed in the Cluster Member field. The modifications you make on
this page apply only to the selected Access Gateway.
If the Access Gateway does not belong to a cluster, this option is not available.
3 Fill in the following fields:
Server Date and Time: Displays the current time and allows you to set the current time. Click
Set Date & Time Manually, then select the current year, month, day, hour, and minute.
IMPORTANT: If the date is set to a time before the Access Gateway certificates are valid,
communication to the Access Gateway is lost. This error cannot be corrected from the
Administration Console. You need to correct it at the console of the Access Gateway machine.
Use the command and select System > Date and Time.
yast
Set Up NTP: Click this option to specify the DNS name or IP address of a Network Time
Protocol server. The installation program enters the name of pool.ntp.org, the DNS name of a
public NTP server. To disable this feature, you must remove all servers from the NTP Server
List. This is not recommended.
Time Zone: Select your time zone, then click OK. Regardless of the method you used to set the
time, you must select a time zone.
4 To save your changes to browser cache, click OK.
5 On the Server Configuration page, click OK.
6 To apply your changes, click Update > OK.
3.7 Customizing Error Pages on the Gateway
Appliance
The Access Gateway Appliance uses the custom error page template to rebrand and localize the
language of error pages that are published to the browser.
Server Configuration Settings 85