Starting And Stopping The Access Gateway; Section 3.3, "Starting And Stopping The Access Gateway - Novell ACCESS MANAGER 3.1 SP1 - GATEWAY GUIDE Manual

Reverse Proxy for the Embedded Service Provider: If you change the Reverse Proxy option
on the Reverse Proxy/Authentication page, then click OK on the Configuration page, the Revert
button cannot cancel this change. It is saved, and the next time you apply a configuration
change, the Reverse Proxy option change is applied. To cancel the change, return to the Reverse
Proxy/Authentication page, set the Reverse Proxy option to the original selection, then click
OK on the Configuration page.
Port of the Reverse Proxy for the Embedded Service Provider: If you change the port of
the reverse proxy that is used by the Embedded Service Provider (click Edit > [Name of
Reverse Proxy]), then click OK on the Configuration page, the Revert button cannot cancel this
change. It is saved, and the next time you apply a configuration change, the port change is
applied. To cancel the change, return to the Reverse Proxy page, set the port to the original
value, then click OK on the Configuration page.
Published DNS Name of the Proxy Service for the Embedded Service Provider: If you
change the Published DNS Name of the proxy service that is used by the Embedded Service
Provider (click Edit > [Name of Reverse Proxy] > [Name of Proxy Service]), then click OK on
the Configuration page, the Revert button cannot cancel this change. It is saved, and the next
time you apply a configuration change, the Published DNS Name is changed. To cancel the
change, return to the Proxy Service page, set the Published DNS Name to its original value,
then click OK on the Configuration page.
Certificates: Certificates are pushed as soon as they are selected. If you change the server
certificate for the reverse proxy (click Edit > [Name of Reverse Proxy]) or change the Web
server certificates (click Edit > [Name of Reverse Proxy] > [Name of Proxy Service] > Web
Servers), the Revert button cannot cancel these changes. To cancel the change, return to the
page, select the original certificate, then click OK.
Renaming a Reverse Proxy: If you change the name of a reverse proxy (click Edit > Reverse
Proxies / Authentication), then click OK, you cannot cancel this change. To cancel the change,
return to the Reverse Proxies / Authentication page, rename the Reverse Proxy to its original
name, then click OK and update the Access Gateway.

3.3 Starting and Stopping the Access Gateway

The Access Gateway has two processes that can be stopped and started: the Access Gateway and the
Embedded Service Provider within the Access Gateway. Normally, you do not need to stop and start
these services. However, if you need to change certain configuration options, you can be prompted
to update the Access Gateway or to restart the Embedded Service Provider.
The following sections explain how to update, stop, start, and schedule a restart of the various
Access Manager components:
Section 3.3.1, "Updating the Access Gateway," on page 79
Section 3.3.2, "Restarting the Access Gateway Service Provider," on page 79
Section 3.3.3, "Starting the Access Gateway Service Provider," on page 80
Section 3.3.4, "Stopping the Access Gateway Service Provider," on page 80
Section 3.3.5, "Restarting the Access Gateway Appliance," on page 80
Section 3.3.6, "Stopping the Access Gateway Appliance," on page 81
78 Novell Access Manager 3.1 SP1 Access Gateway Guide