Novell ACCESS MANAGER 3.1 SP1 - GATEWAY GUIDE Manual page 74

Phase 1: When you select a certificate on one of these pages, then click OK, the certificate is placed
in the keystore on the Administration Console and it is pushed to the Access Gateway. The
certificate is available for use, but it is not used until you update the Access Gateway.
Phase 2: When you select to update the Access Gateway, the configuration for the Access Gateway
is modified to contain references to the new certificate and the configuration change is sent to the
Access Gateway. The Access Gateway loads and uses the new certificate.
74 Novell Access Manager 3.1 SP1 Access Gateway Guide