Memory Issues - Novell ACCESS MANAGER 3.1 SP1 - GATEWAY GUIDE Manual

The following details are displayed if the COS partition is mounted:

7.4.6 Memory Issues

The following sections explain how to troubleshoot memory issues:
"Checking Memory Details and Related Information" on page 191
"Checking Available Memory" on page 191
Checking Memory Details and Related Information
Most of the information, including the memory details, can be accessed by entering the following
command at the prompt:
bash
top
Ensure that the Linux Access Gateway does not occupy more than the percentage of the memory
requirements you set.The ics_dyn process occupies approximately 20 to 25 percent of the total
memory by default.
Levels
Lower Limit
Requirement for Access Gateway
Upper Limit
Default
Checking Available Memory
As the user, enter the following command at the bash prompt:
root
Requirement
5 Percent
500 MB
80 percent
20 percent
Troubleshooting the Linux Access Gateway 191