Changing The Authentication Proxy Service - Novell ACCESS MANAGER 3.1 SP1 - GATEWAY GUIDE Manual

2 In the Reverse Proxy List, select one of the following actions:
New: To create a new reverse proxy, click New. You are prompted to enter a display name
for the proxy. For configuration information, see
and Proxy Service," on page
Reverse proxy names and proxy service names must be unique to the Access Gateway.
Protected resource names need to be unique to the proxy service, but they don't need to be
unique to the Access Gateway.
Delete: To delete a reverse proxy, select the check box by a specific reverse proxy, then
click Delete. To delete all reverse proxies, select the check box by the Name column, then
click Delete.
Enable: To enable a reverse proxy, select the check box by a specific reverse proxy, then
click Enable. To enable all reverse proxies, select the check box by the Name column, then
click Enable.
Disable: To disable a reverse proxy, select the check box by a specific reverse proxy, then
click Disable. To enable all reverse proxies, select the check box by the Name column,
then click Disable.
3 To save your changes to browser cache, click OK.
4 To apply the changes, click the Access Gateways link, then click Update > OK.

6.3.2 Changing the Authentication Proxy Service

If you have multiple reverse proxies, you can select the reverse proxy that users are redirected to for
login and logout.
Section 1.1, "Creating a Reverse Proxy
12.
Protecting Multiple Resources 165