Service Category
Time: Indicates the type of time configuration.
Time must be configured so that it remains
synchronized with the other servers in the
configuration (the Identity Server, SSL VPN
server, J2EE agents, Web servers, etc.).
Gateway: Specifies the type of routing that is
configured for the gateway.
DNS: Specifies whether a domain name server
has been configured and is active.
Services: Indicates the general health of all
configured services.
Address: Indicates whether an IP address has
been configured for the reverse proxy to listen
on. This is required for the Access Gateway to
function.
Embedded Service Provider Communication:
Indicates whether the Embedded Service
Provider can communicate with the Identity
Server.
At least one Identity Server must be configured
and set up as a trusted authentication source for
the Access Gateway.
A green status indicates that a configuration has
been applied; it does not indicate that it is a
functioning configuration.
136 Novell Access Manager 3.1 SP1 Access Gateway Guide
If not healthy
See
Section 3.6, "Setting the Date and Time," on
page
84.
See
Section 3.8.2, "Viewing and Modifying
Gateway Settings," on page
Displays the IP address of the each configured
DNS server and when the server last responded.
See
Section 3.8.3, "Viewing and Modifying DNS
Settings," on page
94.
Displays messages about the health of the
reverse proxy, the back-end Web servers, and
internal services (the SOAP back channel and
the communication module).
See
Section 1.1, "Creating a Reverse Proxy and
Proxy Service," on page
12.
Restart the Embedded Service Provider. If
restarting the Embedded Service Provider fails,
try restarting Tomcat.
92.
Need help?
Do you have a question about the ACCESS MANAGER 3.1 SP1 - GATEWAY GUIDE and is the answer not in the manual?