Restoring Factory Defaults; Setting Date And Time; Accessing The Boot Loader Program - Digi CM User Manual

Restoring Factory Defaults

You have two choices to restore the unit to its factory defaults. The options are
restoring all factory defaults or restoring all factory defaults except IP settings.
To restore your unit to the factory defaults, do the following:
1. Access the configuration menu.
2. Choose System administration.
3. Select Configuration import.
4. Select Location
5. Select Factory Default.
The system will restore factory defaults, and the unit will automatically reboot.

Setting Date and Time

Date and time on the Digi CM can either be kept internally or by an NTP
server. To set the parameters for date and time on the Digi CM, do the
following:
1. Access the configuration menu.
2. Choose System administration.
3. Choose Date and Time.
4. Enter the desired parameters.
5. Choose Save changes.

Accessing the Boot Loader Program

The Boot Loader program can be accessed during the boot process. The main
function of the program is to provide a backup means for restoring the
Chapter 16
Note: Use System Administration to save your configuration in case you need to reload
it later or onto another system. See "Adding and Configuring a PC Card" on page
124 for more information.
Configuration Menu
137