Traps - Digi CM User Manual

Traps

There are additional traps that can be set at the port level. The following table
shows where the trap is under Serial port > Configuration on the web
interface, trap name, configure options, and the trap functions. The MIBs for
login traps can be found at http://ftp.digi.com/support/utilities/digicm/
Chapter 5
Trap Location
Port access menu
Alert configuration
Alert configuration
Alert configuration
Alert configuration
Port event handling
Trap Name
Notify about any login
action to the port
Port login trap
access menu
(succeed and fail)
Notify about login to
this specific port
(succeed and fail)
Port login trap
(only available if host
mode is set to
"Console server")
Notify about a change
of the DTR signal line
Device
(only available if host
connection trap
mode is set to
"Console server")
Notify about changes
in the device's
response to the probe
string (see also
Active detection
"Automatic Device
trap
Recognition" on page
19, only available if
host mode is set to
"Console server")
Notify about modem
test (succeed and fail)
Dial-in modem
(only available if host
test trap
mode is set to "Dial-in
modem")
Notify about the
occurrence of a
keyword in the port
Keyword
log
notification trap
(only available if host
mode is set to
"Console server")
Alerts and Notifications
Function
53