Digi CM User Manual page 89

4. Select Dial-in terminal server for the Host mode from the drop down menu.
5. Fill in the appropriate fields as they apply to your configuration.
6. Click Save & apply.
Chapter 11
The IP address of the system that you will be automatically
Destination IP -
connected to when you access the port.
The TCP port that will be used when the port you
Destination port -´
accessed is automatically connected to a system on the network.
The protocol that will be used to establish the connection to
Protocol -
Destination IP: port. The options are SSH, RawTCP, and Telnet.
- The timeout length ranges from 1 to 3600 seconds; 0 is
Inactivity timeout
unlimited timeout.
- Use the default string or enter your own string.
Modem init string
Configuring Remote Dial-In Access
89