Automatic detection
Use detected port title
results of the detection mechanism to populate the port title. Disable if you
want the default port title. If you choose Disable, you can still use the alarm
feature.
Port title
The Digi CM allows access to a port by using only the number of the port title,
making it unnecessary to know the serial port number.
The default is set to "Port Title xx" with xx being the port number.
Probe string
Special characters are coded in hexadecimal values like:
CR
LF
ESC
Examples are:
Parse string
root\x0d\x0a
\x1Btest\x0d
\x1B test\x0d
\x1b\x20test\x0D
\x1B\x20\x74\x65\x73\x74\x0d
Detected OS
Device detection method
to the device and the response is analyzed. If Passive is selected, the port
Chapter 4
- Enable or disable automatic detection of devices
- Enable if you want the Digi CM to automatically use the
- Manually entered or automatically populated title of the port.
- The probe string is an ASCII string that is sent to the device.
\x0d
\x0a
\x1B
- Displays the result of the Active or Passive detection process.
- If Active is selected a probe string is periodically sent
output
root<CR><LF>
<ESC>test<CR>
<ESC><Space>test<CR>
<ESC><Space>test<CR>
<ESC><Space>test<CR>
Configuring Ports
43