Digi CM User Manual page 35

4. Enter the IP address of the primary and secondary (if applicable) syslog
5. Click Save & apply.
Enable A Compact-flash Card
The compact-flash card must be installed and configured on the Digi CM
before it can be used for system logging or storing Digi CM configuration
information. When storing log files to an external flash card, the size of the
available storage is dependent on both the size of the card and the port counts
of the Digi CM used. The maximum settings for log file sizes are listed in the
following table. See also Adding a Compact-flash Card on page 27.
Chapter 5
server and select the syslog facility from the drop down menu.
Total Flash
Card Size
32
64
128
256
Digi CM System Log
8 4.6
16 4.6
32 4.6
48 4.6
8 9.2
16 9.2
32 9.2
48 9.2
8 18.4
16 18.4
32 18.4
48 18.4
8 36.8
16 36.8
32 36.8
48 36.8
System and Port Logging
Port Log Total Memory
(per port) Used
3.1M
1.53M
29M
762K
500K
6.2M
3.1M
58M
1.53M
1.02M
12.3M
6.2M
118M
3.1M
2.0M
24.6M
12.3M
236M
6.2M
4.1M
35