Setting Alarms And Thresholds - Digi CM User Manual

Setting Alarms and Thresholds

Setting Alarms and Thresholds
Power Controller allows administrators to set an alert via E-mail notification or
an SNMP trap when environmental conditions exceed specifications.
1. Under Power Controller click
2. Enter the appropriate parameters. Select the condition(s) for an alert and
3. Click Save & apply
4. Continue by configuring the outlets.
94
enter the information for the alert (E-mail or SNMP trap or select both).
Note: If multiple power management units are cascaded, the alarm threshold is set for
the sum of all outlets.
Note: To set up an E-mail alert it is assumed that the mail server has already been set
up. If not, go to "Configuring SMTP Alerts" on page 52. If the SMTP server is not
set up, the E-mail option will not be available.
.
Alarms & thresholds
Chapter 12