Adding, Editing, and Removing Users
3. Use the ESC key to return to the main configuration menu.
4. Choose Exit and apply changes.
Choose Exit and
apply changes
when you have
made all your
changes.
Adding, Editing, and Removing Users
1. Choose System administration > User administration and then choose an
2. Configure the user as required.
3. Use the ESC key to return to the main configuration menu.
4. Choose Exit and apply changes.
Adding and Configuring a PC Card
To add a modem card, compact-flash card, wireless LAN card, or a network
card to the Digi CM using the configuration menu, do the following:
1. Access the configuration menu.
2. Choose PC Card configuration
124
operation to perform (Add, Remove, or Edit)
Chapter 16