AMX MAX-CSD ENCODER Instruction Manual page 52

Configuring Communication
The Encryption fields on a MAX-CSE are not enabled. Therefore, to establish a
connection to a target Master, both the ICSP Connectivity and Encryption
requirements should be disabled from within the Master's System Security Settings
page (FIG. 33).
3. Only in the Auto Mode will the System field be user-definable. Default value is 3701.
Having previously selected URL, this field is greyed-out (read-only).
4. Within the Device Number field, enter the MAX unit's currently used device value
(non-duplicated). You must use a value which is not currently being used by another device
currently communicating with the target Master (FIG. 32). Default value is 32001.
5. Within the Master IP/URL field, enter the IP Address or URL used by the target Master. This is
the same IP Address used by NetLinx Studio to communicate with the Master.
6. Unless otherwise necessary, do not alter the default value entered within the Master Port field.
This field allows you to enter the port number used by the NetLinx Master (FIG. 32).
Default value is 1319.
7. Click the Apply button to complete the configuration process and save the parameters to the
MAX unit.
FIG. 32 NetLinx Settings page - showing an example
8. Confirm that the target Master is not configured for require encryption and communicate via a
secured ICSP connection. It is not necessary to remove all security from a target Master to
establish a connection.
46
If the System field is user-editable (when in the Auto Mode), enter the system number
being used by a Master on your same Subnet.
Within Studio, connect to the target Master, click on the Online Tree tab to review what
device values are already being used (FIG. 34).
MAX Video Encoder