AMX MAX-CSD ENCODER Instruction Manual page 27

Administration Page Features (Cont.)
Feature
Program Description:
Program Name
Program Description
Information URL
E-Mail
Phone Number
Genre
Mode:
MAX Video Encoder
Description
This section allows the user/administrator to enter descriptions
for the currently streamed content.
• A unique title associated to the currently streamed media. This
title should be something recognizable to both the
administrator and the target audience.
• This string must be 1 - 20 alpha-numeric characters.
• An example is: Computer Course.
• A unique description of the currently streamed content. This
should be a brief description of the specific content. Do not
confuse this entry with a media category.
• This string must be 1 - 31 alpha-numeric characters.
• An example is: Session 1 - Internet.
• A unique web address identifying the source of the media
stream.
• This can be either a Resolvable Name (such as myschool.com)
or an IP Address (such as 199.99.99.99).
• Provides a contact E-mail address for the streaming media
content provider.
• This string must be in the form: someone@example.com.
• If this format is not entered properly, a red dialog appears below
the field to notify the user of the improper format usage.
• Provides a contact phone number for the streaming media
content provider.
• This string should ONLY use digits, but it will also accept a
phone number with or without hyphens between the digits.
• If this format is not entered properly, a red dialog appears below
the field to notify the user that only digits must be used.
• Provides a drop-down list from which the user can associate a
genre to the media stream.
• Although the default selection is Business, the user can
choose from over 40 pre-created entries.
• An example is: Education.
This section provides the user with both a Play and Stop button
which affects the status of the current media stream.
• Pressing Play causes a previously halted content stream to
begin again. Refreshing the page shows the button size
reduced when in an active play mode.
• Pressing Stop causes the unit to stop encoding and streaming
the current media feed. The source of the stream is not
affected and will continue to feed its signal into the MAX unit
regardless of the stream state.
- Before being able to alter any encoding settings or SET
Video commands, the stream must first be stopped. Once
the settings are changed and applied, the stream can then
be restarted via the Play button.
• As an example: If the stream was halted for 30 minutes and
then begun again (via Play), the streaming media would be 30
minutes further along in the content and would not pick up from
where it left off.
MAX-CSE Web Interface
21