MAX-CSE Web Interface
Default Security Configuration
The Username/Password fields have been pre-populated with administrator/password as the
factory default security login entries.
If a user attempts to access the UI, they are prompted to log into the MAX unit via the on-screen
Enter Network Password security dialog (FIG. 11). After the user's information and rights are
confirmed, the login process is completed and the user is then granted access to the UI pages.
FIG. 11 Enter Network Password security dialog
There is no limit to the number of concurrent logins allowed on the target MAX unit. By default,
the MAX unit is shipped with the following account and access rights:
Default Security Configuration (case-sensitive)
Administrator account:
Username: administrator
Password: password
Rights: All
Characters such as # (pound) & (ampersand) and ' " (single and double quotes) are
invalid and should not be used in usernames, group names, or passwords.
16
MAX units are shipped in a secured configuration which requires the user to enter a
username and password into the on-screen security dialog before gaining access to the UI
pages. This information can later be changed.
Although the Administrator account can be modified numerous times to alter the
username and password required for access, only ONE login profile can exist on the
MAX unit at any given time. The privileges for that single account will always be that of
an Administrator.
All login profiles (with associated Username and Password) are each required to have a
minimum of four characters and a maximum of 27 characters.
Save login profile
selection box
MAX Video Encoder