AMX MAX-CSD ENCODER Instruction Manual page 39

NetLinx Settings Page Features (Cont.)
Feature
NetLinx Master (Cont.):
Master IP/URL
Master Port Number
Encryption
Username/Password
FIG. 20 NetLinx Settings page (showing some sample URL settings)
These changes take effect on the MAX-CSE only after pressing the on-screen Apply button.
MAX Video Encoder
Description
• Allows a user to enter the IP Address or URL used by the target
Master.
- This is the same IP Address used by NetLinx Studio
to communicate with the Master.
• Target Master IP Address must be in IPv4 dot notation
(ex: X.X.X.X).
• Allows the user to enter the port number used by the NetLinx
Master.
• Default value is 1319.
• Based on the Master's security status.
• Default value is Disabled (fields are greyed-out).
• These radio boxes either enable or disable data encryption of
the data transferred between the Master and the MAX over the
ICSP connection. Note that this is optional and if enabled,
requires more processor cycles to maintain.
• This selection determines if a username and password is
required prior to communication between the MAX unit and the
target NetLinx Master via an ICSP connection using a transport
method such as TCP/IP or UDP/IP.
• If the target Master has been previously secured, enter an
alpha-numeric string (into each field) which conforms to a
pre-configured user profile on the Master. This profile must
have sufficient access rights.
• Requiring the encryption of any data being transmitted or
received via an ICSP connection (via the previous radio box)
also mandates that a valid username and password be
provided within the Username and Password fields.
MAX-CSE Web Interface
33