AMX MAX-CSD ENCODER Instruction Manual page 28

MAX-CSE Web Interface
Administration Page Features (Cont.)
Feature
Upload Firmware:
FIG. 14 Administration page - showing a classroom example
FIG. 15 Administration page - Firmware Upload progress message
If the Upload process timer is interrupted with a Timeout error message, WAIT
approximately 10 minutes to allow the unit time to complete the upload process. It is
recommended that you then use NetLinx Studio to both confirm the online status of
the MAX unit and see if the firmware version has properly updated. If the unit does
not appear in the Online Tree, a manual reboot (cycling power) is recommended,
after which Studio can then be used to detect the MAX unit and upload the firmware.
22
Description
Allows a user to upload a Kit file from a known location directly
onto the currently active MAX unit (shown via the UI page).
• Pressing the Browse button opens a Choose File dialog which
allows a user to navigate through the directory structure on the
source computer and locate the new firmware Kit file.
• Pressing the Submit button begins the process of uploading
and incorporating the new firmware. At this point, the UI
expands to display a message indicating the progress of the
firmware upload (FIG. 15).
Even if this screen goes blank,
give the unit time to complete
the upload process. This blank
screen is a result of your
browser temporarily losing
connection with the MAX unit.
MAX Video Encoder