Communicating With The Unit Via The Browser-Based Ui; Browser-Based Ui Application Overview - AMX MAX-CSD ENCODER Instruction Manual

Communicating with the unit via the browser-based UI

1. Launch your web browser.
2. Enter the IP Address of the target unit (as seen on the unit's LCD display) into the web
browser's Address field (FIG. 11).
3. Press the Enter key on your keyboard to initiate communication with the MAX unit and
launch the initial on-screen security dialog (FIG. 11).
4. Enter the words administrator and password into the corresponding User Name/Password
fields. This is the factory default security login information. This information can later be
changed.
5. Click OK to enter the information and proceed to the first UI page.

Browser-based UI Application Overview

The UI web page (FIG. 12) can be divided into separate sections or frames, some of which are
independent of the current selection and can both display their own information and contain their
own functionality.
Navigation
frame
Stream
Status
frame
FIG. 12 Browser Application frames (showing the initial screen)
The first Active page displayed after a successful login is the Administration page.
MAX Video Encoder
The MAX unit is shipped in a secured configuration which requires the user to enter a
username and password into the on-screen security dialog before gaining access to the UI
pages.
MAX-CSE Web Interface
Browser's
Address field
Active Page
frame
First page displayed
after login
17