Table of Contents
Advertisement
MAX-CSE Web Interface
The following table lists the A/V Setup page features that an administrator or other authorized user
can configure.
A/V Setup Page Features
Feature
A/V Setup page:
Apply
Cancel
Microphone icon
Video:
Video In
Video Port
Audio:
Mic Gain
These changes take effect on the MAX-CSE only after pressing the on-screen Apply button.
30
Description
Provides the user with the ability to select the source of the
incoming video signal (from either the rear Composite or
S-Video port), the format of the incoming video (NTSC/PAL), and
the gain level given to the incoming audio signal.
• Allows a user to incorporate/save the current information to the
target MAX unit.
• Cancels the current action and prevents any change to the
previously entered information.
• Toggles the audio state of the incoming microphone signal
between active and muted.
This section allows the user/administrator to define the detection
and format parameters for the incoming video signal.
• These two radio boxes provide the option to select from either
Composite or S-Video as the incoming video source type.
• The selected type determines which rear connector is used as
the video input connector.
• This selection instructs the MAX-CSE to use/expect video from
a specified rear video connector.
• As an example: setting the Video In option to Composite, tells
the MAX-CSE to begin detecting a video signal from the rear
Composite connector.
• These two radio boxes provide the option to select from either
NTSC or PAL as the format type of the incoming video signal.
• This selection instructs the MAX-CSE to use/expect a particular
video format.
This section allows the user/administrator to define the gain used
by the current microphone input.
• This field allows the user to enter a value (from 0-99)
associated with the gain used by the rear microphone input.
• The incoming microphone audio signal can me muted by either
toggling the state of the Microphone icon located at the top of
each UI page or entering a value of zero into this field.
MAX Video Encoder
Advertisement
Table of Contents
