Ring Settings Section - Cisco SPA2102-AN - Single Port Router Administration Manual

ATA Voice Field Reference
User page
Cisco Small Business ATA Administration Guide
Voice tab > User page >

Ring Settings section

Default Ring
Default CWT
Hold Reminder
Ring
Call Back Ring
Cfwd Ring Splash
Len
Cblk Ring Splash
Len
VMWI Ring Splash
Len
VMWI Ring Policy
Default ringing pattern, 1 – 8, for all callers.
The default is 1.
Default CWT pattern, 1 – 8, for all callers.
The default is 2.
Ring pattern for reminder of a holding call when the phone
is on-hook.
The default is None.
Ring pattern for call back notification.
The default is None.
Duration of ring splash when a call is forwarded
(0 – 10.0s).
The default is 0.
Duration of ring splash when a call is blocked (0 – 10.0s).
The default is 0.
Duration of ring splash when new messages arrive before
the VMWI signal is applied (0 – 10.0s).
The default is .5.
The parameter controls when a ring splash is played when
a the VM server sends a SIP NOTIFY message to the ATA
device indicating the status of the subscriber's mail box. 3
settings are available:
•
New VM Available—ring as long as there is 1 or more unread
voice mail
•
New VM Becomes Available—ring when the number of
unread voice mail changes from 0 to non-zero
•
New VM Arrives—ring when the number of unread voice
mail increases.
The default is New VM Available.
B
226