Cisco SPA2102-AN - Single Port Router Administration Manual page 240

STEP 1
STEP 2
STEP 3
STEP 1
STEP 2
Cisco Small Business ATA Administration Guide
ATA Variables--DELETE this file FROM PDF before publishing
During Drafting (when you want to see condition indicators):
On the menu, choose Special > Variables. Click Title, and then click Edit. Verify
that it shows the correct title of this book.
On the menu, choose Special > Conditional Text settings. Click the Show/Hide
button, and verify that the conditional text settings are set as show below:
•
Choose Show: ATA Guide Only
•
Check the Show Condition Indicators check box.
Go to your book file, and complete the following steps:
a. Select all files in the book.
b. Choose File > Import Formats.
c. Import From Document: Choose this file (ATA_Variables.fm.)
d. Click Deselect All to clear all of the check boxes, and then check only the
following check boxes:
-
Variable Defintions
-
Conditional Text Settings
e. Click Import.
When you are ready to publish:
On the menu, choose Special > Conditional Text settings. Click the Show/Hide
button, and verify that the conditional text settings are set as show below:
•
Choose Show: ATA Guide Only
•
Uncheck the Show Condition Indicators check box., so indicators are
hidden.
Go to your book file, and complete the following steps:
a. Select all files in the book.
b. Choose File > Import Formats.
c. Import From Document: Choose this file (ATA_Variables.fm.)
1
240