Static Ip Settings Section; Pppoe Settings Section - Cisco SPA2102-AN - Single Port Router Administration Manual

ATA Routing Field Reference
WAN Status page
Cisco Small Business ATA Administration Guide
Router tab > WAN Setup page >

Static IP Settings section

Static IP
NetMask
Gateway
Router tab > WAN Setup page >

PPPoE Settings section

PPPoE Login Name
PPPoE Login
Password
PPPoE Service Name
Static IP address of ATA device, which takes effect if
DHCP is disabled.
The default is 0.0.0.0.
The NetMask used by ATA device when DHCP is
disabled.
The default is 255.255.255.0.
The default gateway used by ATA device when DHCP
is disabled.
The default is 0.0.0.0.
The account name assigned by the ISP for connecting
on a Point-to-Point Protocol over Ethernet (PPPoE) link.
The password assigned by the ISP for connecting on a
Point-to-Point Protocol over Ethernet (PPPoE) link.
The service name assigned by the ISP for connecting
on a Point-to-Point Protocol over Ethernet (PPPoE) link.
A
108