Cisco SPA2102-AN - Single Port Router Administration Manual page 141

ATA Voice Field Reference
Regional page
Cisco Small Business ATA Administration Guide
Ring Back 2 Tone
Confirm Tone
SIT1 Tone
SIT2 Tone
SIT3 Tone
SIT4 Tone
MWI Dial Tone
Cfwd Dial Tone
Your ATA device plays this ringback tone instead of
Back Tone
if the called party replies with a SIP 182
response without SDP to its outbound INVITE request. The
default value is the same as
cadence is 1s on and 1s off.
The default is 440@-19,480@-19;*(1/1/1+2).
Brief tone to notify the user that the last input value has
been accepted.
The default is 600@-16; 1(.25/.25/1).
Alternative to the Reorder Tone played when an error
occurs as a caller makes an outbound call. The RSC to
trigger this tone is configurable on the SIP screen.
The default is 985@-16,1428@-16,1777@-16;20(.380/0/
1,.380/0/2,.380/0/3,0/4/0).
Alternative to the Reorder Tone played when an error
occurs as a caller makes an outbound call. The RSC to
trigger this tone is configurable on the SIP screen.
The default is 914@-16,1371@-16,1777@-16;20(.274/0/
1,.274/0/2,.380/0/3,0/4/0).
Alternative to the Reorder Tone played when an error
occurs as a caller makes an outbound call. The RSC to
trigger this tone is configurable on the SIP screen.
The default is 914@-16,1371@-16,1777@-16;20(.380/0/
1,.380/0/2,.380/0/3,0/4/0).
Alternative to the Reorder Tone played when an error
occurs as a caller makes an outbound call. The RSC to
trigger this tone is configurable on the SIP screen.
The default is 985@-16,1371@-16,1777@-16;20(.380/0/
1,.274/0/2,.380/0/3,0/4/0).
Played instead of the Dial Tone when there are unheard
messages in the caller's mailbox.
The default is 350@-19,440@-19;2(.1/.1/1+2);10(*/0/
1+2).
Played when all calls are forwarded.
The default is 350@-19,440@-19;2(.2/.2/1+2);10(*/0/
1+2).
Ring Back Tone , except the
B
Ring
141