Cisco SPA2102-AN - Single Port Router Administration Manual page 188

ATA Voice Field Reference
Line page
Cisco Small Business ATA Administration Guide
Disconnect Tone
Disconnect Tone
continued
This value is the tone script which describes to the SPA the
tone to detect as a disconnect tone. The syntax follows a
standard Tone Script with some restrictions. Default value
is standard US reorder (fast busy) tone, for 4 seconds.
Restrictions:
•
2 frequency components must be given. If single frequency
is desired, the same frequency is used for both
•
The tone level value is not used. –30 (dBm) should be used
for now.
•
Only 1 segment set is allowed
•
Total duration of the segment set is interpreted as the
minimum duration of the tone to trigger detection
•
6 segments of on/off time (seconds) can be specified. A 10%
margin is used to validated cadence characteristics of the
tone.
The Disconnect Tone Script values for various countries
follow:
US—480@-30,620@-30;4(.25/.25/1+2)
UK—400@-30,400@-30; 2(3/0/1+2)
France—440@-30,440@-30; 2(0.5/0.5/1+2)
Germany—425@-10; 10(0.48/0.48/1)
Netherlands—425@-30,425@-30; 2(0.5/0.5/1+2)
Sweden—425@-10; 10(0.25/0.25/1)
Norway—425@-10; 10(0.5/0.5/1)
Italy—425@-30,425@-30; 2(0.2/0.2/1+2)
Spain—425@-10; 10(0.2/0.2/1,0.2/0.2/1,0.2/0.6/1)
Portugal—425@-10; 10(0.5/0.5/1)
Poland—425@-10; 10(0.5/0.5/1)
Denmark—425@-10; 10(0.25/0.25/1)
New Zealand—400@-15; 10(0.25/0.25/1)
Australia—425@-13; 10(0.375/0.375/1)
B
188