Subscriber Information Section - Cisco SPA2102-AN - Single Port Router Administration Manual

ATA Voice Field Reference
PSTN Line page (SPA3102)
Cisco Small Business ATA Administration Guide
Use DNS SRV
DNS SRV Auto
Prefix
Proxy Fallback Intvl This parameter sets the delay (sec) after which the PAP2T
Proxy Redundancy
Method
Voice tab > PSTN Line page (SPA3102) >

Subscriber Information section

Display Name
User ID
Password
Whether to use DNS SRV lookup for Proxy and Outbound
Proxy.
The default is no.
If enabled, the PAP2T will automatically prepend the Proxy
or Outbound Proxy name with _sip._udp when performing
a DNS SRV lookup on that name.
The default is no.
will retry from the highest priority proxy (or outbound
proxy) servers after it has failed over to a lower priority
server. This parameter is useful only if the primary and
backup proxy server list is provided to the PAP2T via DNS
SRV record lookup on the server name. (Using multiple
DNS A record per server name does not allow the notion of
priority and so all hosts will be considered at the same
priority and the PAP2T will not attempt to fall back after a
fail over).
The default is 3600
The PAP2T makes an internal list of proxies returned in
DNS SRV records. In normal mode this list will contain
proxies ranked by weight and priority.
Based on SRV port
If the parameter
PAP2T creates a list in normal mode first, and then inspects
the port numbers based on the 1
The default is Normal.
Display name for caller ID.
Extension number for this line.
Password for this line.
B
is configured, the
st proxy's port on the list.
206