Distinctive Ring Settings; Ring Settings - Cisco ATA 191 User Manual

Distinctive Ring Settings

Field
CWCID Setting
Dist Ring
Message Waiting
CONFCID Setting
Distinctive Ring Settings
You can customize how your phone indicates an incoming call by selecting different ringtones. But this feature
requires a specific type of computer code called a script. Contact your admistrator to have this feature enabled.

Ring Settings

You can customize your ring tones to bst suit your needs. For example, you can have one ringtone for your
incoming calls, and another ring for your callback notifications.
Ring settings are set up from the Voice tab of the Configuration Utility page. Use the information in the
following table to guide you. Once you have entered your settings, click Save to retain your revisions.
The following table describes the Ring settings that you configure from the Voice tab of the Configuration
Utility page.
Table 9: Ring Settings
Field Name
Default Ring
Default CWT
Hold Reminder Ring
Cisco ATA 191 and ATA 192 Analog Telephone Adapter User Guide for Multiplatform Firmware
18
Description
Call Waiting Caller ID Generation.
Default setting: Yes
Distinctive Ring.
Default setting: Yes
-
Default setting: no
Default setting: Yes
Description
-
Default setting: 1
-
Default setting: 1
-
Default setting: 8
Configure Features
Usage Guidelines
This feature assigns an ID
for a call that is waiting.
Enable this feature if you
plan to configure different
numbers to the same
phone and want to give
different ringtone for each
of the numbers.
Enable if you want to be
notified of voicemail
messages.
-
Usage Guidelines
Allows you to select from one of 8
different ringtones for your incoming
calls.
Allows you to select from one of 8
different ringtones for call waiting.
Allows you to select from one of 8
different ringtones or none for calls
on hold.